Where to buy?

Battery terms: the most common terms explained

What is an anode? How would you explain self-discharge? Batteries are quite straightforward to use, but sometimes a little jargon can get in the way of your understanding. Below we’ve listed up some of the most common battery terms. Read on to find out more!

Battery parts

What are the different parts of a battery? A short summary:

  • anode: the negative electrode during discharge. While charging, this becomes positive. In AA and AAA batteries, this is usually the protruding part on the top.
  • cathode: the positive electrode during discharge. While charging, this becomes negative. In AA and AAA batteries, this is usually the flat part on the bottom.
  • seal: a part of the battery cell that makes sure chemicals cannot leave the battery. It also limits air intake. A good seal is essential for a safe battery.

Technical battery terms explained

Whereas they’re simple to use, the electrical processes are often a little more complex. Let’s take a look at the most common technical battery terms used:

  • voltage causes electric charges to move through the wire or other conductors. It is measured in volt (V). All Panasonic eneloop batteries have a 1.2 V output.
  • capacity: the amount of energy that is stored inside a battery. It is measured in mAh (milliamp hours). An AA eneloop battery has a capacity of 1900 mAh. The lighter eneloop lite and more powerful eneloop pro have a capacity of 950 and 2500 mAh respectively.
  • cycle: one sequence of charge and discharge, or: how many times you can use and recharge a battery. Every rechargeable battery has a set amount of cycles (i.e. cycle life) before it starts losing capacity and efficiency. An eneloop battery has 2100 cycles, eneloop lite has 3000 and eneloop pro has 500.

(In)correct battery usage

What about some less technical battery terms

  • (self-)discharge, drain: discharge or drain happens when a battery loses energy. This ideally happens while it’s used in a device. However, a battery may lose (more) power when used incorrectly or when stored for longer periods of time. This depends on shelf life (see further).
  • short-circuit: when electricity flows unintendedly, usually through a very short ‘path’, it will make the battery heat up and cause damage. Read more about battery safety here.
  • shelf life: the amount of time you can store unused batteries before they lose a significant amount of their capacity. For eneloop batteries, batteries maintain up to 70% of their charge after 10 years.
  • memory effect: when a battery is discharged to the same ‘level’. For example: repeatedly discharging a battery to only 50% of its capacity before recharging it will cause the battery to lose some of its potential. Luckily, there is no proven memory effect in eneloop batteries.