Αγοράστε προϊόντα

BQ-CC80 charger including 2 eneloop AA 1900 mAh

USB-in charger

Tech Specs
AC100-240V 50-60Hz
DC 5 V
Timer (10h)
LED x 2 Charging: ON (Green), Fully charged: OFF
AA x 2 or 4 / AAA x 2 or 4 cells
6,6 x 8,5 x 2,8 cm
65g (without USB-cord)
How to use the K-KJ80MCC20USB
Step 1
How to place the batteries?
placing eneloop batteries
  • Place batteries in the slots according to the polarity position (+/-) indicated on each slot.
  • WARNING: if a AAA battery is inserted from the (+) end first, the (-) terminal on the charger might be damaged.
Step 2
How to arrange the batteries?
  • 2 batteries should be charged simultaneously.
  • If a AA size and AAA size battery is inserted, the indicator will blink and the batteries will not charge.It is not possible to charge one battery in isolation
Step 3
How to plug the charger?
  • Connect the USB cable to a USB terminal or a USB adapter for AC (not included).
Step 4
How the check the LED light status?

Check the LED light on the unit:

  • The charger will indicate that charging is conducted through the indicator lights being lit.
  • If the indicator does not light or blinks
    • Make sure that the batteries are inserted correctly and that proper contact is made with each terminal
    • Check that the USB cable and USB power adaptor are correctly inserted
    • Check that the batteries are not damaged and are rechargeable
Step 5
How long to charge the batteries?

1900 - 2000 mAh

950 - 1000 mAh

10.0 hour

5.0 hour

750 - 800 mAh

550 - 650mAh

10.0 hour

8.0 hour

  • After charging time, disconnect the included USB cable and remove the batteries.
  • For your own safety, this charger has an automatic cut off function after approximately 10 hours. However the charging times shown in Table 1 are recommended for longer battery life
Step 6
How to remove the batteries?
Αγοράστε προϊόν